What to look for in a quality window tinting installation

What Is A High Quality Window Tinting  Installation?

Despite being the nicest looking vehicle around complete with customized hoods, mufflers, stickers and everything, it only takes a bad window tinting job to spoil its whole look. The obvious and very noticeable output of a bad window tinting job is apparent, especially to car enthusiasts. 

More importantly, it can affect some aspects of its performance in blocking theharmful effects of sunlight. Plus, the likelihood of premature peeling and bubbling is high which have negative effects in its appearance and performance. 

So it’s important to know whether your vehicle has undergone a good or bad window tinting job. If proven that the latter is the case, you must protest your claims at the auto tinting shop that serviced you and have them replace it immediately, without additional cost. 

Here are the telltale signs to look at to determine whether you have a bad window tinting job:

What to look for in a quality window tinting installation Flying Windows Tint

Evident Gap and Uneven Lines

The first thing to look at is the window edges. Check for big gaps between the window films and the line of cut of the film. If big gaps are present and the line of cut are uneven, it only means a bad window tinting job due to poor workmanship. 

Also, the line of cut of the window film must be seamless enough without ragged cuts and should fit the window section snugly.

Purple Tint

Purple tint appear only in low-quality window tint films due to UV exposure. Seeing a purple-ish window tint film suggests that your auto tinting shop had used an inferior material.

Appearance id Bubbles

The appearance of bubbles is caused by two reasons, both of which concerns the workmanship of installation and quality of window films used. 

In terms of workmanship, bubbling only appears if the prep work on the windows is not done properly. A good prep work must remove all dirt and foreign material as to provide a suitable adhesion surface for the window film. Even though you have the best window films to be installed, a bad prep work will always guarantee appearance of bubbles. 

In terms of quality, bubbles will appear when low-quality window films’ adhesive starts to break down prematurely. When this happens, air will enter the gap which will bulge even more — forming unsightly bubbles.

Window Film Failure To Stick To Dot Matrix 

The dot matrix are basically textured surface for the shade band to stick to the front windshield. This textured surface however is difficult for window tint films to adhere to. A good auto tinting shop will have ways to overcome this issue and install the window films with ease. 

If the window film isn’t installed properly, you will notice broken lines and bubbles at the dot matrix.

Bubbling at Defroster Wires

Just like the dot matrix, defroster bars are also textured in a way that it’s elevated from the surface of the rear window. This window feature makes it difficult for window tint films to adhere to. However, reputable auto tinting shops have no problems installing window films at defroster bars. 

If the window film isn’t installed properly, there will be gaps at the defroster bar without adhesive. These gaps are the places where bubbles form and becomes larger over time. 

Find Your Own Reputable Auto Tinting Shop

You’re maybe wondering, if I’m guaranteed a good window tinting job from reputable auto tinting shop, I won’t be doing any of those things outlined above. That’s true, but it’s always better to know more. Knowing more gives you certain advantages given different circumstances. 

However, if you do are looking for a reputable auto tinting shop, we at Flying Window Tinting can guarantee a good window tinting job, removing the likelihood of you inconvenienced by bad window tinting job. 

Flying Window Tinting have years of experience servicing thousands of customers yearly. We offer smart solution, so expect it done right the first time. Call Flying Window Tinting for more information!

Visit Us At:

  • 187 South Semoran Blvd., Orlando, FL 32807

Services Offered:

  • Window Tinting
  • Window Tint Removal
  • Headlight Cleaning
  • Vinyl Graphics Installation

We Serve These Locations:

  • Orlando, FL
  • Winter Park, FL
  • Alafaya, FL
  • Azalea Park, FL