How to Maintain Window Tint so it will last longer?

How to Maintain Window Tint so it will last longer

Doing Proper maintenance on your window tint will let your window film last a lot longer even though you get a warranty his best to maintain it properly so you don’t have to get it redone. Many times when you have to redo the windows they may damage your defrosters or scratch your glass. Also, a lot of times a company might not be in business still. So your warranty might not be worth anything so if you follow the following steps it will let your window tinting on your vehicle last a lot longer.

 When You First Get Your Window Tint?

When you first get your window tint it needs time for it to dry to the glass property. The installer cannot take out all the water time of insulation. So you cannot roll the windows down for three to five days while the sun dries out the rest of the water out and then the heat from the sun sticks the solar film to the window properly. So don’t be concerned if you see a fuse minor bubbles in the window tint when you first pick it up they will go away.

Best way to clean your Window Tint

The best product to clean your window is to use a  window cleaner that does not have ammonia. The window tint has a clear coat on the top layer which protects the tinted layer from scratching and chemicals and damaging it. But ammonia in glass cleaners after a period of time starts to destroy the clear coat.  Once that clear coat damaged it will look blurry and needs to be replaced.  So we recommend a window tint cleaner that is ammonia free. The one our shop recommends using our shop daily called Spray away window cleaner.

How long window tint last depends on the brand and warranty you get from the manufacturer?

Just maintaining the Windows using the proper cleaning and not damaging it may not necessarily make your windows last forever. A major factor in the longevity of your tint is the quality of the material. American-made Window Films last a lot longer than the imported window films from China or India as their main focus is a cheap price so they use cheaper materials. Another major reason that will affect the length of your window tint job is where you live.  if you live and the Northern United States or you have a very short summer your window tint will last a lot longer than if you live in the Southern United States like Florida or Arizona where you get the Sun a lot longer.

Things that you damaged your window tint that’s you wouldn’t expect?

Some things you might expect to damage your window tint are things like seatbelts hitting it. When you take off the seatbelt do not let it fly off as some have a strong spring on it and it might hit it on the glass beside you. After a period you will see small holes in the tint on the glass. Also carrying a ladder, tools, aluminum beach chairs, etc in the rear of your vehicle and it hits the glass will scratch it. Many people lend their cars are friends to move stuff and they bring it back scratched or damaged. So if lending out your car it might be wise to advise people to be careful on the window tint on the inside.

So just a bit of care when you have sharp metal objects you transporting in your car. We find the only thing that makes any scratches are things that have a metal edge.  Wood or plastic doesn’t seem to damage it.

Having pets around your window tint?

Having pets in your car does not damage your window tint.  We find the claws of cats and dogs are not sharp enough to scratch the tint. The biggest problem is when they rub their nose they leave a lot of smudges on the glass. But a good glass cleaner will clean that off and we had advised not to leave the smudges on too long . You can also get a plastic silicone cleaner that leaves a silicone film on the window and sorts of acts like an insulator against things sticking on the glass. Just make sure it’s chemical-free that won’t hurt your pets

Car washes don’t always use the right product to clean your car

Most car washes know not to use harsh chemicals on window tint. We find here in Florida they are knowledgeable on the best products that won’t damage your tint. But if you live up north where Window tint is not as popular you might want to tell them first that you have window tint and to use ammonia-free chemicals. Also, make sure they don’t have any sharp objects like buttons on clothes or when they’re cleaning it not to have their rings damage it.

How much your car is exposed to the Sun during the day

One of the final factors we find that determines the life of your window tint is how much sun exposure it has during the day. Some people parking and Underground parking While others are parked outside. If you park outside and the sun shines on your Windows 8 hours a day. It will reduce the life of your window tint.  We recommend parking the windshield towards the Sun or parK under a tree or shaded area.  If that’s not possible  rotate  the car each day so not one window is towards the sun all the time

Conclusion

in conclusion, the best way to maintain your film is to prevent it from scratches and to reduce the amount of sun that exposed to a daily. Most films in cooler weather will last  15 to 20 years if it’s a good quality film. In the South when it’s a warmer climate good quality film usually lasts between 10 to 12 years. if you get a good quality film like llumar 3M they come with a lifetime warranty and if you keep the receipt they will redo it free of charge parts and labor.

How to Remove Old Window Tint that has Gone Bad?

How to Remove Old Window Tint that has Gone Bad

Why does Window Tint Go bad?

There are two things why window tint goes bad. The first one is window tint is made up usually of two to three separate layers of film. One layer is the color film another is a clear coating to protect it from scratching and when the window tint goes bad they start to separate. The second reason why window tinting may go bad is that the glue goes bad due to excessive heat over time. The chemicals will break down then the glue will start to Bubble. So when you see cars bubbling. It’s not the window tint Orlando that’s bad it said the glue on the window Orlando. Are you looking for some “best car window tint near me”? Check out the Orlando Flying Window Tinting.

What has to be removed?

To clean the old window tinting to get the window back to the original condition. You have to remove the window film first and then the second part is removing any glue that may stick to the glass. The first part is usually the hardest because if the window film is really bad it might want to come off in very small pieces if it’s not on too long usually comes off in one piece which makes your life a lot easier

How long before Window Tint Orlando goes bad?

There are a couple of things that determine how long are window tint will last before going bad.  Some factors that will determine that is 1st  the quality brand of window tint that you purchase. The better the brand the better the raw materials are. If you get a really cheap window film that says made in China usually they go bad very quickly because they use cheaper quality materials to keep their cost down while you use some American brands like 3M or Llumar window tint they use the latest quality material and them last much longer. Second, it depends on the temperature of where you live if you live Up in Detroit window tint will probably last forever, if you live in Florida or Arizona the Heat will reduce the lifespan of the window film.

The third factor that will determine how long your window film will last is if your car is a park in the garage or during the day it’s parked outside directly in the sun. If it’s parked inside a garage the life of the car will lot longer if it’s parked where you work and in the sun 8 to 10 hours directly every day.

The lifespan will shorten, So the best thing to make your window tint on your car last longest is to  buy a brand name window film with a good warranty and also try to keep it out of direct sun during the day if you can be in a garage may just park it under a tree or in the shade,

Why is it so hard to remove old tint

The reason why auto window tint is so hard to remove as because when the material starts to break down I need trying to pull it off and breaks into small pieces and then he said makes it harder to pull off because it sticks to the window.   When you tried to pull the old window tinting that comes out in little pieces.

Will you be able to save your defroster wires while removing the tint

The biggest concern people have about removing window tint themselves and not getting a professional window tinting job you do it is if they will be able to save their defroster wires. In the South, defroster wires are not too important but as you go further north where you get a lot of frost in the morning it is very important.

Here at Flying Window Tinting, we start off with the side doors and that will use you tell us how bad the window tint will be to remove. If the side window comes off in small pieces we know the chances of the rear defroster not working may increase it’s only happening to maybe 20% of the cars.  Usually, really bad window tint has probably been on over 12 years anything under seven years usually is easier to come out depending on the brand. To find out if the window tint is  good quality or a cheaper quality window tinting in Orlando just try the small as a window on the side first and that you would usually tell you whether the film will come off easy or hard

3  ways to remove window tint

1- Using a razor blade

Using this method is usually the hardest want to do and takes much more physical energy. What you basically doing is using a spray bottle with soap and water and some small scraper blades you wet the window with it in and start to scrape off the film like how you scrape paint off of the glass. As long as you keep the window really wet and soapy it will not scratch glass a disadvantage for this process is that if you have a defroster wire on the back of your window it will not work if you scrape it

2-Soaking it with water using a banking system

The 2nd process is to soak it in grease remover like 409. They also make professional chemicals that you can use .you get a black garbage bag and cut it out on the outside of the rear window to the shape of the glass that is clear.  Then soak the window with the chemical and put the black bag over the tint on the inside. Then every 20 minutes keep re-soaking it.

After then try to peel the window tint off the window if it continues to keep sticking you need to soak it until it releases smoothly. The hotter the outside the better it is I recommend doing it with the temperature over 80 degrees or put a heat lamp on it. The heat speeds up the chemical to absorb through the window tint.

 3-Using a professional steam machine

this third process needs a steam machine. Professional window tint shops t have Steam Machines worth around  $1,000 but you can also use inexpensive clothes steamer. What you do when you start peeling the corner and steam the tint. The heat from the steamer and the moisture usually weakens the glue and keeps the Window tinting Orlando together. It’s also good to do it outside in the sun the warmer the glasses the easier for the glue to remove.

Final stage

Once you have all the window tint in Orlando removed.  There may some glue residue left on the glass. You can now use the one-sided razor to scrape the glue but if you don’t want to damage the defroster wire on the rear of the glass. You get some 409 degreasers or grease remover and also some steel wool 0000  This is the finest steel wool you can get so it won’t scratch glass. After all the glue has gone double check in the corners to make sure no glue is hidden in the corners.

Conclusion

So finally decide which process you want to use.  Make a list of all the tools and chemicals you may need. Start early in the morning w when it’s sunny and warm. I would not do it on a rainy or cloudy day. It will be a bit time-consuming depending on how hot the weather is and how old the window tint is but in the end, it will save you a lot of money. it’s so funny oh my God.