Platinum Plus, Chrome tint for Automobiles in Orlando

 

 

Introduction

If you are looking for a platinum or chrome automotive tint in Orlando, You should know  Llumar is the only manufacturer that makes Chrome tint design for automobiles.

Most manufacturers only make Chrome tint for homes and businesses. But it is too reflective to put on an automobile and stay legal on the road. The Florida law has a maximum reflection that window tint you can have. Platinum Plus Chrome tint is a unique look for your car also it has one of the highest heat rejections over black tint.

 

window tint orlando

Llumar  is the only tint  company that makes Chrome tint for cars

 

Llumar is the only brand of window tint that makes a chrome finish tint for automobiles. Llumar specializes in automotive tint has some of the best selections for your car. It also backs it up with good warranty and durability and it’s a product that you can trust. Llumar has it been in business since the 1980s and is one of the innovators in making new products for the consumer.

LLumar has always had custom tint while many other manufacturers just stick to the basics. Lamar has manufactured black tint bronze mirrored tint red tint yellow tint. So whatever type of finish it like when your car checks your Newmar dealer you have quite a selection from them. We are authorized Llumar dealer in orlando, FL

 What’s the benefit of platinum plus  Chrome tint for cars

Using Platinum Plus Chrome tint will your car has many benefits. it has one of the highest heat rejections over black or charcoal tint. Another great benefit is that it’s a lot clearer to see out while driving. This is very beneficial for people driving at night that sometimes have a problem seeing out the rear insides while driving. 

The Finish Platinum Plus Chrome tint from llumar gives a nice shiny chrome finish that matches up well with a lot of chrome trim in your car. This tint is great for people to want a custom look and something that’s different than the average black window tinting.

 

 

 Platinum Plus Chrome tint is legal for Florida

Platinum Plus Chrome tint is legal for the roads in Florida. the Florida Highway Patrol has a certain level of reflection that a window tint can have. Platinum Plus Chrome tint does fall within the criteria of the Florida Highway Patrol law. so you can feel safe driving it not get any tickets while driving. I’m not sure what other state’s laws on reflective tint on your car are so please check your local state law office.

 

 Clearest  film see out from the inside

 

 A  major benefit of Platinum Plus Chrome tint is that seeing out while driving a lot clearer and the black window tint. You also see a major difference while driving at night when you’re looking outside your rear window. the black tent sometimes at night is a bit hard to see through and so that is concerning to some people. because there is no color in the Platinum Plus Chrome tint that makes it easier to see it through at night. it’s also great we’re seeing through while raining. They’re 35% Platinum Plus tint is virtually no vision lost signal the car. It’s like heaven clear tent but keeping out nearly 40% of the heat from coming in. many older drivers do not want to lose the Clear Vision of backing up and driving so the 35% is a good choice. even though it’s a light film it will still keep heat out your car architecture interior from fading 

mirrored window tint

Great film for sunroofs

Platinum Plus Chrome window tint is a great film for putting on your sunroof. one of the advantages of using Chrome tint over black tint to put on your roof is that Chrome tint will reflect a lot more heat coming in your car over-the-back tint. also because Platinum Plus Chrome tint is a lot easier to see through it gives I’m more natural. While looking through the sunroof. With a black tint, it will give Alex like it’s cloudy outside. many people like sunroofs to give your car and open feeling while driving but don’t like the heat it allows in while driving. So where the Platinum Plus Chrome tint you will get the high heat rejection but also the Clear View looking out.

 

 Great custom look 

 

Platinum Plus has a custom finish giving it a nice Chrome look to your windows. it looks especially good on light color cars white gray silver finishes. well. 95% of the tinted cars on the road I’ll come in black or charcoal. Many people prefer the exclusive look at the chrome finish. Also, a lot of luxury cars have a lot of chrome packages on it on the chrome finish complimented real nice. so if you’re looking for something unique for your car take a look at Platinum Plus Chrome tint it’s one of the nicest looking tints on the market. 

 

 lifetime warranty

Platinum Plus Chrome tint comes with a lifetime warranty. that warranty is a part and labor guarantee that their window tint will not peel fade or bumble. Because there’s no dye in the film the tint it will never fade or discolor. I’ve seen people have it on the curb for 20 years and look like brand-new after.

A lot of the charcoal film will change the color of this color because there’s a colored dye to give it that black charcoal look. Platinum Plus Chrome tint has a metal eye finished but has no color dye in it so you never have to fear of it changing color or feeding.

 

Conclusion 

 

 It holds up well to constant Heat and wears and tear over the years. With a custom look, you will always be a favorite and with a lifetime backing it people have confidence it will last the life of the car. In conclusion, the Platinum Plus Chrome film is one of the top films on the market. not too many llumar dealers carry this film because of their cost but here at flying window tinting we do care. In stock. we have a display in our showroom showing to finish if you’d like to drop by and see it.

This was written by Steven Hopkinson owner /operator of Flying Window Tinting.  

`We have been in business in Orlando same location 

for 20 years

We serve the following locations

  • orlando
  • winter park
  •   alafaya
  • azalea park

We also provide the following service

  • Window tinting
  • tint removal
  • headlight cleaning
  • vinyl graphics

Contact us for free quotes on your vehicle

Computer Cut Window Tint is a must for Quality Installation

Computer Cut Window tint

Computer cut window tint has been out for about 15 years. Not all window tint shops carry computer window tint because unless you have a high-volume shop it’s not worth the expense of investing in the equipment and software. A lot of window tinters hesitant on embracing computer cut because they thought expense was too much and that they do better quality and cutting the tint. They are many reasons i write  below why going to Window Tint Shop to have your car tinted and having the computer  pre-cut your window tint  and not have them hand cut the tint

100% Accuracy

We love our employees, but when it comes to cutting tint no human being can deliver the level of precision possible with computer-driven machines. When you bring your vehicle to Flying Window Tinting our technicians use an extensive vehicle database to locate the exact size and specifications of your vehicle’s windows. The computer can then dial in those specs, and transfer them to a cutting machine, also known as a plotter, which cuts whole clean pieces of tint according to the exact size of your windows.

No Knives, No Risk

Our plotter does all the cutting, so all our technicians have to do is peel away excess tint and apply it to your vehicle. Since our tint pieces are all pre-cut, there never a time that a knife used near your vehicle. There no risk of damaging glass or rubber seals. Be wary of other tint shops that lay tint on your windows and cut it directly on your vehicle. We found over the past 10 years. The glass got a lot softer on the chance of scratching. Glass has gotten higher if you cut on the car.

The glass that cars come with now is a lot softer because they are trying to reduce the weight of the glass so it’s not as dense as in older cards. Another risk of using a knife to cut your tint on your car is that. When they cut on the edge of the glass where there are a rubber trim chances of them cutting the rubber increases quite a bit. And I saw some cars where you cut the rubber too low it could cause leaking in the car. Not to mention the cost of replacing the rubbers which many companies that are not reputable might not want to cover the cost process to give a quality job I know damage to the customer’s car.

Expert Installation

Once the machines have done their thing, it’s time for our certified window tint installers to take the pieces and skillfully apply them to your windows. With years of experience, our installers can deliver a near flawless fit, and since we cut whole tint pieces. There is no need for additional cutting and the margin for error even further diminished.  I have been tinting for over 25 years And by far the computer cut process is its biggest game-changer in the window tint business. this gives it our installers a better product to work with since all the windows are cut the exact same way. When you cut by hand you may have a different edge or corner on one window opposed to another window on the opposite side of the car.

Which Method Looks Better?

Can a veteran window tinter do just as good a job of cutting film as a computer-controlled plotter? Nine times out of 10, the answer is yes. However, what about those days when there are distractions? What if the knife gets dull? A fact of life is that accidents happen. Cutting your window film on a plotter means that we do not go near your vehicle until it is time to clean the windows and begin the installation. The plotter cuts the same path every time. The lines are perfectly straight, with no jagged or wavy edges.

Your Vehicle is Not a Cutting Board

Installing window film on your car or truck requires cutting each piece of tint to size and applying it to your window. Historically, tinters would lay a large piece of film over your window and, using a bright light, cut along the visible edge of the window with a sharp knife. Once the tint is cut, it can installed on the inside of the glass.

The problem with cutting window tint on your vehicle is that the knife can mark or scratch your glass. These cut and scratch marks can cause stress points in your glass that could lead to failure in sudden temperature swings or if a hard object hits the glass. Removing the scratches and cut marks nearly impossible.

Hand-cutting window tint also runs the risk of damaging the rubber seals around your windows and plastic trim. Your paint can be scratched because someone is leaning over your car or truck for extended periods of time. We are not saying that tinters that cut by hand cannot do a good job– they simply expose themselves and your vehicle to more risk.

Computer plotters cut film pieces with exact precision

The information they use accessed through a large database containing film patterns that match the glass and body dimensions of your car model. The patterns developed utilizing the best practices for the automotive tint industry. All the templates that come in the software carefully designed by the car manufacturer to give the exact size and measurement to each window.  Nowadays with everything made from computers. There is no variation in sizes. So you will always get the perfect fit with a cut from the computer.

A computer cutting plotter is consistent

It cuts a pattern the same way every time. This eliminates the problem of human error, which is extremely common in the process of making patterns by hand. They reduce film waste due to miscuts. They also save time from getting your vehicle tinted and delivered back to you more quickly. If you concerned about the environment, it’s important to note that reducing wasted film material and energy also reduces the carbon footprint of the company using the system, your car is safe from cutting mishaps.

No cutting occurs on any part of the vehicle. Cutting automotive glass patterns by hand without etching or scratching the glass requires an extremely delicate touch and years of experience. Damage to glass, paint and rubber gaskets by sharp blades are common when using the older technique. With a plotter on the team, your immaculate and beloved car won’t going under the knife.

 

How to Maintain Window Tint so it will last longer?

How to Maintain Window Tint so it will last longer

Doing Proper maintenance on your window tint will let your window film last a lot longer even though you get a warranty his best to maintain it properly so you don’t have to get it redone. Many times when you have to redo the windows they may damage your defrosters or scratch your glass. Also, a lot of times a company might not be in business still. So your warranty might not be worth anything so if you follow the following steps it will let your window tinting on your vehicle last a lot longer.

 When You First Get Your Window Tint?

When you first get your window tint it needs time for it to dry to the glass property. The installer cannot take out all the water time of insulation. So you cannot roll the windows down for three to five days while the sun dries out the rest of the water out and then the heat from the sun sticks the solar film to the window properly. So don’t be concerned if you see a fuse minor bubbles in the window tint when you first pick it up they will go away.

Best way to clean your Window Tint

The best product to clean your window is to use a  window cleaner that does not have ammonia. The window tint has a clear coat on the top layer which protects the tinted layer from scratching and chemicals and damaging it. But ammonia in glass cleaners after a period of time starts to destroy the clear coat.  Once that clear coat damaged it will look blurry and needs to be replaced.  So we recommend a window tint cleaner that is ammonia free. The one our shop recommends using our shop daily called Spray away window cleaner.

How long window tint last depends on the brand and warranty you get from the manufacturer?

Just maintaining the Windows using the proper cleaning and not damaging it may not necessarily make your windows last forever. A major factor in the longevity of your tint is the quality of the material. American-made Window Films last a lot longer than the imported window films from China or India as their main focus is a cheap price so they use cheaper materials. Another major reason that will affect the length of your window tint job is where you live.  if you live and the Northern United States or you have a very short summer your window tint will last a lot longer than if you live in the Southern United States like Florida or Arizona where you get the Sun a lot longer.

Things that you damaged your window tint that’s you wouldn’t expect?

Some things you might expect to damage your window tint are things like seatbelts hitting it. When you take off the seatbelt do not let it fly off as some have a strong spring on it and it might hit it on the glass beside you. After a period you will see small holes in the tint on the glass. Also carrying a ladder, tools, aluminum beach chairs, etc in the rear of your vehicle and it hits the glass will scratch it. Many people lend their cars are friends to move stuff and they bring it back scratched or damaged. So if lending out your car it might be wise to advise people to be careful on the window tint on the inside.

So just a bit of care when you have sharp metal objects you transporting in your car. We find the only thing that makes any scratches are things that have a metal edge.  Wood or plastic doesn’t seem to damage it.

Having pets around your window tint?

Having pets in your car does not damage your window tint.  We find the claws of cats and dogs are not sharp enough to scratch the tint. The biggest problem is when they rub their nose they leave a lot of smudges on the glass. But a good glass cleaner will clean that off and we had advised not to leave the smudges on too long . You can also get a plastic silicone cleaner that leaves a silicone film on the window and sorts of acts like an insulator against things sticking on the glass. Just make sure it’s chemical-free that won’t hurt your pets

Car washes don’t always use the right product to clean your car

Most car washes know not to use harsh chemicals on window tint. We find here in Florida they are knowledgeable on the best products that won’t damage your tint. But if you live up north where Window tint is not as popular you might want to tell them first that you have window tint and to use ammonia-free chemicals. Also, make sure they don’t have any sharp objects like buttons on clothes or when they’re cleaning it not to have their rings damage it.

How much your car is exposed to the Sun during the day

One of the final factors we find that determines the life of your window tint is how much sun exposure it has during the day. Some people parking and Underground parking While others are parked outside. If you park outside and the sun shines on your Windows 8 hours a day. It will reduce the life of your window tint.  We recommend parking the windshield towards the Sun or parK under a tree or shaded area.  If that’s not possible  rotate  the car each day so not one window is towards the sun all the time

Conclusion

in conclusion, the best way to maintain your film is to prevent it from scratches and to reduce the amount of sun that exposed to a daily. Most films in cooler weather will last  15 to 20 years if it’s a good quality film. In the South when it’s a warmer climate good quality film usually lasts between 10 to 12 years. if you get a good quality film like llumar 3M they come with a lifetime warranty and if you keep the receipt they will redo it free of charge parts and labor.

How to Remove Old Window Tint that has Gone Bad?

How to Remove Old Window Tint that has Gone Bad

Why does Window Tint Go bad?

There are two things why window tint goes bad. The first one is window tint is made up usually of two to three separate layers of film. One layer is the color film another is a clear coating to protect it from scratching and when the window tint goes bad they start to separate. The second reason why window tinting may go bad is that the glue goes bad due to excessive heat over time. The chemicals will break down then the glue will start to Bubble. So when you see cars bubbling. It’s not the window tint Orlando that’s bad it said the glue on the window Orlando. Are you looking for some “best car window tint near me”? Check out the Orlando Flying Window Tinting.

What has to be removed?

To clean the old window tinting to get the window back to the original condition. You have to remove the window film first and then the second part is removing any glue that may stick to the glass. The first part is usually the hardest because if the window film is really bad it might want to come off in very small pieces if it’s not on too long usually comes off in one piece which makes your life a lot easier

How long before Window Tint Orlando goes bad?

There are a couple of things that determine how long are window tint will last before going bad.  Some factors that will determine that is 1st  the quality brand of window tint that you purchase. The better the brand the better the raw materials are. If you get a really cheap window film that says made in China usually they go bad very quickly because they use cheaper quality materials to keep their cost down while you use some American brands like 3M or Llumar window tint they use the latest quality material and them last much longer. Second, it depends on the temperature of where you live if you live Up in Detroit window tint will probably last forever, if you live in Florida or Arizona the Heat will reduce the lifespan of the window film.

The third factor that will determine how long your window film will last is if your car is a park in the garage or during the day it’s parked outside directly in the sun. If it’s parked inside a garage the life of the car will lot longer if it’s parked where you work and in the sun 8 to 10 hours directly every day.

The lifespan will shorten, So the best thing to make your window tint on your car last longest is to  buy a brand name window film with a good warranty and also try to keep it out of direct sun during the day if you can be in a garage may just park it under a tree or in the shade,

Why is it so hard to remove old tint

The reason why auto window tint is so hard to remove as because when the material starts to break down I need trying to pull it off and breaks into small pieces and then he said makes it harder to pull off because it sticks to the window.   When you tried to pull the old window tinting that comes out in little pieces.

Will you be able to save your defroster wires while removing the tint

The biggest concern people have about removing window tint themselves and not getting a professional window tinting job you do it is if they will be able to save their defroster wires. In the South, defroster wires are not too important but as you go further north where you get a lot of frost in the morning it is very important.

Here at Flying Window Tinting, we start off with the side doors and that will use you tell us how bad the window tint will be to remove. If the side window comes off in small pieces we know the chances of the rear defroster not working may increase it’s only happening to maybe 20% of the cars.  Usually, really bad window tint has probably been on over 12 years anything under seven years usually is easier to come out depending on the brand. To find out if the window tint is  good quality or a cheaper quality window tinting in Orlando just try the small as a window on the side first and that you would usually tell you whether the film will come off easy or hard

3  ways to remove window tint

1- Using a razor blade

Using this method is usually the hardest want to do and takes much more physical energy. What you basically doing is using a spray bottle with soap and water and some small scraper blades you wet the window with it in and start to scrape off the film like how you scrape paint off of the glass. As long as you keep the window really wet and soapy it will not scratch glass a disadvantage for this process is that if you have a defroster wire on the back of your window it will not work if you scrape it

2-Soaking it with water using a banking system

The 2nd process is to soak it in grease remover like 409. They also make professional chemicals that you can use .you get a black garbage bag and cut it out on the outside of the rear window to the shape of the glass that is clear.  Then soak the window with the chemical and put the black bag over the tint on the inside. Then every 20 minutes keep re-soaking it.

After then try to peel the window tint off the window if it continues to keep sticking you need to soak it until it releases smoothly. The hotter the outside the better it is I recommend doing it with the temperature over 80 degrees or put a heat lamp on it. The heat speeds up the chemical to absorb through the window tint.

 3-Using a professional steam machine

this third process needs a steam machine. Professional window tint shops t have Steam Machines worth around  $1,000 but you can also use inexpensive clothes steamer. What you do when you start peeling the corner and steam the tint. The heat from the steamer and the moisture usually weakens the glue and keeps the Window tinting Orlando together. It’s also good to do it outside in the sun the warmer the glasses the easier for the glue to remove.

Final stage

Once you have all the window tint in Orlando removed.  There may some glue residue left on the glass. You can now use the one-sided razor to scrape the glue but if you don’t want to damage the defroster wire on the rear of the glass. You get some 409 degreasers or grease remover and also some steel wool 0000  This is the finest steel wool you can get so it won’t scratch glass. After all the glue has gone double check in the corners to make sure no glue is hidden in the corners.

Conclusion

So finally decide which process you want to use.  Make a list of all the tools and chemicals you may need. Start early in the morning w when it’s sunny and warm. I would not do it on a rainy or cloudy day. It will be a bit time-consuming depending on how hot the weather is and how old the window tint is but in the end, it will save you a lot of money. it’s so funny oh my God.