How Much Tint Can I Apply Legally?

how dark is tinting

Almost every car owner out there fancies their cars to be aesthetically pleasing as possible. There are a number of options that you can do such as getting a new paint job, installing new vent visor shades, upgrading headlights and taillights, or getting new wheels. 

However, these are all so expensive. So for those looking for a more budget-friendly approach can opt for window tinting. Not only is it affordable, it can improve the looks of your car ten-fold! 

If you happen to be at Orlando, Florida, we at Flying Window Tinting is your best bet for a window tinting job. 

Practical Benefits of Tinting Your Car:

  • Increased privacy inside your car.
  • Can potentially lower the ambient temperature inside the car, especially during hot days.
  • Gives extra protection from harmful ultraviolet rays.
  • Can shield you from annoying glare of the sun.
  • Offers your car a more striking and well-grounded look.
How Much Tint Can I Apply Legally? Flying Windows Tint
Striking and well-grounded look

Because your car will be changed drastically, it’s bound by state laws on how much tint you can apply legally.

Why is there a Limit on Window Tinting?

Before considering tinting your car, there are prescribed limits of how much tint you can apply legally. The reason for this is mainly about security concerns.

Since most transgressions and criminal acts involve a moving car, authorities regulate everything that may obstruct vision inside the car. As responsible car owners, we are obliged to comply to avoid breaking the law.

Furthermore, the limits on window tinting also targets the safety of drivers. Drivers need enough light from the outside to drive safely. Unfortunately, this is not possible if you have dark tint.

As a general rule of thumb, the two front windows should be tinted lighter while the rear and passenger side windows can be tinted darker. This can be translated to the more common jargon among the car industry, the Visible Light Transmittance or VLT.

Basically, VLT is a rating indicating the amount of light that passes through the window tint film. This rating, shown in percentage, is the most common specification with regards to window tint films. The lower the rating, the darker the tint is.

How Much Tint Can I Apply Legally? Flying Windows Tint
VLT Ratings

Regardless, as a responsible car owner, it’s better to be familiar with the allowable tint levels just to be safe. You wouldn’t want paying hefty fines and a record on your driver’s license, right?

For a better hands-on experience in choosing the right tint shade for you, check out our tint simulator.

Allowable Tint Levels by Each State:

How Much Tint Can I Apply Legally? Flying Windows Tint

So how much tint can I apply legally? In this section, we will outline all the allowable tint levels by each state.

If you’re from Florida, you’re only allowed 28% VLT ratings or shade on the front side windows. Therefore, your window tint films intended for the front windows should have a VLT rating more than 28%.

  • All percentages shown indicates the allowable VLT rating.
  • Front side windows are the windows beside the driver and front passenger.
  • Back side windows are the windows beside the rear passngers.
  • Rear windows are the windows at the back.
  • Windshield shade band refers to the line parallel at the top of the windshield. Commonly classified as AS-1, it’s usually rated as 70% VLT.
  • Reflectivity refers to a strip of material, either a metal or film, that is reflective.

Alabama

  • Front Side Windows: 32%
  • Back Side Windows: 32%
  • Rear Windows: 32%
  • Windshield Shade Band: 6 inches
  • Reflectivity: no more than 20%

Alaska

  • Front Side Windows: 70%
  • Back Side Windows: 40%
  • Rear Windows: 40%
  • Windshield Shade Band: 5 inches
  • Reflectivity: no reflectivity

Arizona

  • Front Side Windows: 33%
  • Back Side Windows: any
  • Rear Windows: any
  • Windshield Shade Band: AS-1 marking
  • Reflectivity: no more than 35%

Arkansas

  • Front Side Windows: 25%
  • Back Side Windows: 25%
  • Rear Windows: 10%
  • Windshield Shade Band: 5 inches
  • Reflectivity: no reflectivity

California

  • Front Side Windows: 70%
  • Back Side Windows: any
  • Rear Windows: any
  • Windshield Shade Band: 4 inches
  • Reflectivity: no reflectivity

Colorado

  • Front Side Windows: 27%
  • Back Side Windows: 27%
  • Rear Windows: 27%
  • Windshield Shade Band: 4 inches
  • Reflectivity: no reflectivity

Connecticut

  • Front Side Windows: 35%
  • Back Side Windows: 35%
  • Rear Windows: any
  • Windshield Shade Band: AS-1 marking
  • Reflectivity: no more than 21%

Delaware

  • Front Side Windows: 70%
  • Back Side Windows: any
  • Rear Windows: any
  • Windshield Shade Band: AS-1 marking
  • Reflectivity: no reflectivity

Florida

  • Front Side Windows: 28%
  • Back Side Windows: 15%
  • Rear Windows: 15%
  • Windshield Shade Band: AS-1 marking
  • Reflectivity: no more than 25%

Georgia

  • Front Side Windows: 32%
  • Back Side Windows: 32%
  • Rear Windows: 32%
  • Windshield Shade Band: 6 inches
  • Reflectivity: no more than 20%

Hawaii

  • Front Side Windows: 35%
  • Back Side Windows: 35%
  • Rear Windows: 35%
  • Windshield Shade Band: no inch requirement, 70%
  • Reflectivity: no reflectivity

Idaho

  • Front Side Windows: 35%
  • Back Side Windows: 20%
  • Rear Windows: 35%
  • Windshield Shade Band: AS-1 marking
  • Reflectivity: no more than 35%

Illinois

  • Front Side Windows: 35%
  • Back Side Windows: 35%
  • Rear Windows: 35%
  • Windshield Shade Band: 6 inches
  • Reflectivity: no reflectivity

Indiana

  • Front Side Windows: 30%
  • Back Side Windows: 30%
  • Rear Windows: 30%
  • Windshield Shade Band: AS-1 marking
  • Reflectivity: no more than 25%

Iowa

  • Front Side Windows: 70%
  • Back Side Windows: any
  • Rear Windows: any
  • Windshield Shade Band: AS-1 marking
  • Reflectivity: no excessive reflection, but not specified

Kansas

  • Front Side Windows: 35%
  • Back Side Windows: 35%
  • Rear Windows: 35%
  • Windshield Shade Band: AS-1 marking
  • Reflectivity: no reflectivity

Kentucky

  • Front Side Windows: 35%
  • Back Side Windows: 18%
  • Rear Windows: 18%
  • Windshield Shade Band: AS-1 marking
  • Reflectivity: no more than 25%

Louisiana

  • Front Side Windows: 40%
  • Back Side Windows: 25%
  • Rear Windows: 12%
  • Windshield Shade Band: AS-1 marking
  • Reflectivity: no more than 20%

Maine

  • Front Side Windows: 35%
  • Back Side Windows: any
  • Rear Windows: any
  • Windshield Shade Band: 4 inches
  • Reflectivity: no reflectivity

Maryland

  • Front Side Windows: 35%
  • Back Side Windows: 35%
  • Rear Windows: 35%
  • Windshield Shade Band: 5 inches
  • Reflectivity: no law

Massachusetts

  • Front Side Windows: 35%
  • Back Side Windows: 35%
  • Rear Windows: 35%
  • Windshield Shade Band: 6 inches
  • Reflectivity: no more than 35%

Michigan

  • Front Side Windows: any percent but only 4 inches from the top window
  • Back Side Windows: any
  • Rear Windows: any
  • Windshield Shade Band: 4 inches
  • Reflectivity: no more than 35%

Minnesota

  • Front Side Windows: 50%
  • Back Side Windows: 50%
  • Rear Windows: 50%
  • Windshield Shade Band: none allowed
  • Reflectivity: no more than 20%

Mississippi

  • Front Side Windows: 28%
  • Back Side Windows: 28%
  • Rear Windows: 28%
  • Windshield Shade Band: AS-1 marking
  • Reflectivity: no more than 20%

Missouri

  • Front Side Windows: 35%
  • Back Side Windows: any
  • Rear Windows: any
  • Windshield Shade Band: AS-1 marking
  • Reflectivity: no more than 35%

Montana

  • Front Side Windows: 24%
  • Back Side Windows: 14%
  • Rear Windows: 14%
  • Windshield Shade Band: AS-1 marking
  • Reflectivity: no more than 35%

Nebraska

  • Front Side Windows: 35%
  • Back Side Windows: 20%
  • Rear Windows: 20%
  • Windshield Shade Band: 5 inches or AS-1 marking, whichever comes first
  • Reflectivity: no more than 35%

Nevada

  • Front Side Windows: 35%
  • Back Side Windows: any
  • Rear Windows: any
  • Windshield Shade Band: AS-1 marking
  • Reflectivity: no law

New Hampshire

  • Front Side Windows: non allowed
  • Back Side Windows: 35%
  • Rear Windows: 35%
  • Windshield Shade Band: 6 inches
  • Reflectivity: no reflectivity

New Jersey

  • Front Side Windows: non allowed
  • Back Side Windows: any
  • Rear Windows: any
  • Windshield Shade Band: 6 inches
  • Reflectivity: no reflectivity

New Mexico

  • Front Side Windows: 20%
  • Back Side Windows: 20%
  • Rear Windows: 20%
  • Windshield Shade Band: 5 inches or AS-1 marking, whichever comes first
  • Reflectivity: no law

New York

  • Front Side Windows: 70%
  • Back Side Windows: 70%
  • Rear Windows: any
  • Windshield Shade Band: 6 inches
  • Reflectivity: no reflectivity

North Carolina

  • Front Side Windows: 35%
  • Back Side Windows: 35%
  • Rear Windows: 35%
  • Windshield Shade Band: AS-1 marking
  • Reflectivity: no more than 20%

North Dakota

  • Front Side Windows: 50%
  • Back Side Windows: any
  • Rear Windows: any
  • Windshield Shade Band: no more than 70%
  • Reflectivity: no reflectivity

Ohio

  • Front Side Windows: 50%
  • Back Side Windows: any
  • Rear Windows: any
  • Windshield Shade Band: no more than 70%
  • Reflectivity: no reflectivity

Oklahoma

  • Front Side Windows: 25%
  • Back Side Windows: 25%
  • Rear Windows: 25%
  • Windshield Shade Band: 5 inches or AS-1 marking, whichever comes first
  • Reflectivity: no more than 20%

Oregon

  • Front Side Windows: 35%
  • Back Side Windows: 35%
  • Rear Windows: 35%
  • Windshield Shade Band: 6 inches
  • Reflectivity: no more than 13%

Pennsylvania

  • Front Side Windows: 70%
  • Back Side Windows: 70%
  • Rear Windows: 70%
  • Windshield Shade Band: non allowed
  • Reflectivity: no reflectivity

Rhode Island

  • Front Side Windows: 70%
  • Back Side Windows: 70%
  • Rear Windows: 70%
  • Windshield Shade Band: AS-1 marking
  • Reflectivity: no law

South Carolina

  • Front Side Windows: 27%
  • Back Side Windows: 27%
  • Rear Windows: 27%
  • Windshield Shade Band: AS-1 marking
  • Reflectivity: non-reflective

South Dakota

  • Front Side Windows: 35%
  • Back Side Windows: 20%
  • Rear Windows: 20%
  • Windshield Shade Band: AS-1 marking
  • Reflectivity: no reflectivity

Tennessee

  • Front Side Windows: 35%
  • Back Side Windows: 35%
  • Rear Windows: 35%
  • Windshield Shade Band: AS-1 marking
  • Reflectivity: no reflectivity

Texas

  • Front Side Windows: 25%
  • Back Side Windows: 25%
  • Rear Windows: any
  • Windshield Shade Band: 5 inches or AS-1 marking, whichever comes first
  • Reflectivity: no more than 25%

Utah

  • Front Side Windows: 43%
  • Back Side Windows: any
  • Rear Windows: any
  • Windshield Shade Band: AS-1 marking
  • Reflectivity: no reflectivity

Vermont

  • Front Side Windows: non allowed
  • Back Side Windows: any
  • Rear Windows: any
  • Windshield Shade Band: AS-1 marking
  • Reflectivity: no reflectivity

Virginia

  • Front Side Windows: 50%
  • Back Side Windows: 35%
  • Rear Windows: 35%
  • Windshield Shade Band: AS-1 marking
  • Reflectivity: no more than 20%

Washington

  • Front Side Windows: 24%
  • Back Side Windows: 24%
  • Rear Windows: 24%
  • Windshield Shade Band: 6 inches
  • Reflectivity: no more than 35%

Washington D.C.

  • Front Side Windows: 70%
  • Back Side Windows: 50%
  • Rear Windows: 50%
  • Windshield Shade Band: 5 inches or AS-1 marking, whichever comes first
  • Reflectivity: no law

West Virginia

  • Front Side Windows: 35%
  • Back Side Windows: 35%
  • Rear Windows: 35%
  • Windshield Shade Band: 5 inches
  • Reflectivity: 20%

Wisconsin

  • Front Side Windows: 50%
  • Back Side Windows: 35%
  • Rear Windows: 35%
  • Windshield Shade Band: AS-1 marking
  • Reflectivity: no law

Wyoming

  • Front Side Windows: 28%
  • Back Side Windows: 28%
  • Rear Windows: 28%
  • Windshield Shade Band: 5 inches or AS-1 marking, whichever comes first
  • Reflectivity: no more than 20%

About the Writer:

This was written by Steven Hopkinson owner/operator of Flying Window Tinting. We have been in business in Orlando, Florida in the same location for 20 years! 

We Serve These Locations:

  • Orlando, FL
  • Winter Park, FL
  • Alafaya, FL
  • Azalea Park, FL

Services Offered:

  • Window Tinting
  • Window Tint Removal
  • Headlight Cleaning
  • Vinyl Graphics Installation

Contact us for free quotes on your vehicle

How to Remove Old Window Tint that has Gone Bad?

How to Remove Old Window Tint that has Gone Bad

Why does Window Tint Go bad?

There are two things why window tint goes bad. The first one is window tint is made up usually of two to three separate layers of film. One layer is the color film another is a clear coating to protect it from scratching and when the window tint goes bad they start to separate. The second reason why window tinting may go bad is that the glue goes bad due to excessive heat over time. The chemicals will break down then the glue will start to Bubble. So when you see cars bubbling. It’s not the window tint Orlando that’s bad it said the glue on the window Orlando. Are you looking for some “best car window tint near me”? Check out the Orlando Flying Window Tinting.

What has to be removed?

To clean the old window tinting to get the window back to the original condition. You have to remove the window film first and then the second part is removing any glue that may stick to the glass. The first part is usually the hardest because if the window film is really bad it might want to come off in very small pieces if it’s not on too long usually comes off in one piece which makes your life a lot easier

How long before Window Tint Orlando goes bad?

There are a couple of things that determine how long are window tint will last before going bad.  Some factors that will determine that is 1st  the quality brand of window tint that you purchase. The better the brand the better the raw materials are. If you get a really cheap window film that says made in China usually they go bad very quickly because they use cheaper quality materials to keep their cost down while you use some American brands like 3M or Llumar window tint they use the latest quality material and them last much longer. Second, it depends on the temperature of where you live if you live Up in Detroit window tint will probably last forever, if you live in Florida or Arizona the Heat will reduce the lifespan of the window film.

The third factor that will determine how long your window film will last is if your car is a park in the garage or during the day it’s parked outside directly in the sun. If it’s parked inside a garage the life of the car will lot longer if it’s parked where you work and in the sun 8 to 10 hours directly every day.

The lifespan will shorten, So the best thing to make your window tint on your car last longest is to  buy a brand name window film with a good warranty and also try to keep it out of direct sun during the day if you can be in a garage may just park it under a tree or in the shade,

Why is it so hard to remove old tint

The reason why auto window tint is so hard to remove as because when the material starts to break down I need trying to pull it off and breaks into small pieces and then he said makes it harder to pull off because it sticks to the window.   When you tried to pull the old window tinting that comes out in little pieces.

Will you be able to save your defroster wires while removing the tint

The biggest concern people have about removing window tint themselves and not getting a professional window tinting job you do it is if they will be able to save their defroster wires. In the South, defroster wires are not too important but as you go further north where you get a lot of frost in the morning it is very important.

Here at Flying Window Tinting, we start off with the side doors and that will use you tell us how bad the window tint will be to remove. If the side window comes off in small pieces we know the chances of the rear defroster not working may increase it’s only happening to maybe 20% of the cars.  Usually, really bad window tint has probably been on over 12 years anything under seven years usually is easier to come out depending on the brand. To find out if the window tint is  good quality or a cheaper quality window tinting in Orlando just try the small as a window on the side first and that you would usually tell you whether the film will come off easy or hard

3  ways to remove window tint

1- Using a razor blade

Using this method is usually the hardest want to do and takes much more physical energy. What you basically doing is using a spray bottle with soap and water and some small scraper blades you wet the window with it in and start to scrape off the film like how you scrape paint off of the glass. As long as you keep the window really wet and soapy it will not scratch glass a disadvantage for this process is that if you have a defroster wire on the back of your window it will not work if you scrape it

2-Soaking it with water using a banking system

The 2nd process is to soak it in grease remover like 409. They also make professional chemicals that you can use .you get a black garbage bag and cut it out on the outside of the rear window to the shape of the glass that is clear.  Then soak the window with the chemical and put the black bag over the tint on the inside. Then every 20 minutes keep re-soaking it.

After then try to peel the window tint off the window if it continues to keep sticking you need to soak it until it releases smoothly. The hotter the outside the better it is I recommend doing it with the temperature over 80 degrees or put a heat lamp on it. The heat speeds up the chemical to absorb through the window tint.

 3-Using a professional steam machine

this third process needs a steam machine. Professional window tint shops t have Steam Machines worth around  $1,000 but you can also use inexpensive clothes steamer. What you do when you start peeling the corner and steam the tint. The heat from the steamer and the moisture usually weakens the glue and keeps the Window tinting Orlando together. It’s also good to do it outside in the sun the warmer the glasses the easier for the glue to remove.

Final stage

Once you have all the window tint in Orlando removed.  There may some glue residue left on the glass. You can now use the one-sided razor to scrape the glue but if you don’t want to damage the defroster wire on the rear of the glass. You get some 409 degreasers or grease remover and also some steel wool 0000  This is the finest steel wool you can get so it won’t scratch glass. After all the glue has gone double check in the corners to make sure no glue is hidden in the corners.

Conclusion

So finally decide which process you want to use.  Make a list of all the tools and chemicals you may need. Start early in the morning w when it’s sunny and warm. I would not do it on a rainy or cloudy day. It will be a bit time-consuming depending on how hot the weather is and how old the window tint is but in the end, it will save you a lot of money. it’s so funny oh my God.

Window Tinting Florida Can Trust: 10 Reasons We Use Llumar Window Tinting Film

llumar window tinting florida

When it Comes to Llumar Window Tinting Florida can trust here at Flying Window Tinting Orlando we know that the quality of window tint film matters. That’s why we only trust Llumar window tinting film. If you’re not familiar with Llumar brand car window tint film you may be wondering why we put so much trust in their brand, well today we’re going to share just a few reasons why we trust our reputation to the Llumar brand.

10 Reasons Llumar Window Tinting Film is Window Tinting Florida Can Trust

1. Eastman Performance Films, LLC, the manufacturer of Llumar window tinting films has over sixty years of experience in window tinting film manufacturing!

2. Llumar window tinting film is durable! We have researched more window tinting films than we can count, but when it comes to durability, no window tint film stands up to the test of time better than Llumar!

3. Many companies trust any window tinting Florida shop with their product, but Llumar only trusts their window tinting films in the hands of auto shops that will do them justice. Yes, you read that right, Llumar actually screens the auto shops that they trust to use their films because they want to make sure that they are done the justice that they deserve!

Window Tinting Florida Can Trust: 10 Reasons We Use Llumar Window Tinting Film Flying Windows Tint
llumar window tint

4. there is  a range of Llumar Window Tinting films that each provide a variety of benefits. Unlike some tint film companies that offer one type of film that does one thing, Llumar has many different car tints that each offer specific benefits so that no matter what you need from your film, you can find one to fit your needs!

5. Not all companies are created equal, this is particularly true when it comes to window tint film manufacturers. Llumar really stands out from other window tinting film companies because of the amount of research that they put into their products. Rather than just creating products that “look right”, Llumar takes the time to do the research and back their products up with science and numbers!

6. Bigger isn’t always better, but in the case of Llumar’s manufacturing site, it happens to be true. Llumar doesn’t just have the largest manufacturing plant in the country, they have one of the largest and most integrated windows and performance-coated film manufacturing sites in the world! Why is this important? Because their huge manufacturing site is dedicated to product research, design, and development and not just manufacturing!

7. There are plenty of brands offering window tinting Florida trusts, but when it comes to Llumar Window Tinting, their films are trusted worldwide. So trusted, in fact, that over 100 countries around the world trust Llumar films as their film of choice. What does that say? It says that with the thousands of options available on the auto market, more than one hundred nations trust Llumar!

8. Our Llumar Window Tinting Florida shop trusts Llumar for many reasons, but one of the most important to us is that Llumar offers more than just auto window tint film. In addition to their auto films, Llumar also offers window tinting films for buildings that are trusted by corporations worldwide. We feel this is important for you to know because while your car reflects you, a corporate building reflects a corporation’s reputation so we know that Llumar would never allow a subpar product to leave their factory floor!

9. Another characteristic that makes us love Llumar Window Tinting is that they are a company that is dedicated to sustainability. Unlike other companies who don’t think twice about the impact that their window tinting manufacturing process has on the environment. Llumar works daily to be sure that they are having a positive effect on the environment.

10. Within every industry, there are associations that are responsible for the regulation of quality. Llumar has made sure that they teamed up with as many of these associations as possible so that the Llumar Window Tinting film that you invest in provides you with the qualities that you want from a product as well as the qualities that you need.

Need Window Tinting Florida Can Rely On?

If you need window tinting Florida can rely on and only trust your car with the very best, Flying Window Tinting Orlando can help! Make an appointment with one of our professionally trained technicians today by calling (407) 380-1202!

At Flying Window Tinting, we offer a lifetime warranty! We add a new life to your windows.
Visit Us At:
187 South Semoran Blvd., Orlando, FL 32807
Services Offered:
Window Tinting
Window Tint Removal
Headlight Cleaning
Vinyl Graphics Installation
We Serve These Locations:
Orlando, FL
Winter Park, FL
Alafaya, FL
Azalea Park, FL